Free Web Hosting Provider - Web Hosting - E-commerce - High Speed Internet - Free Web Page
Search the Web

 
AUTOMATIC DRY SYRUP POWDER FILLING MACHINE

MODEL ADSPF - 60
 
DESCRIPTION
A proven concept of vacuum drawing and compressed air flushing of powder for micro dosing of antibiotic powder is now used for dry syrup powder filling through a small intermediate funnel to avoid manual handling of bottles and achieving speed without loosing conceptual high degree of accuracy for uniform density free flowing dry syrups.
 
OPERATION
The dry syrup granules placed in the powder hopper is continuously agitated by a pair of agitators for maintaining bulk density of powder, before it is drawn into the port of the powder wheel.

The powder wheel's port when subjected to the vaccum draws powder from the hopper and indexed further, where the excess powder is doctored off.

The powder remains in the port due to the vacuum, till the indexed port of the powder wheel reaches in the vertical position.

Bottles continuously received on the infeed side of the conveyor are positioned and held perfectly in vertical position by separators, just below the funnel.

The timed dose of low pressure compressed air / inert gas empties powder from the port of powder wheel into the funnel.

Further, the powder gets transferred from funnel to the bottle and the bottle after filling is released by the bottle separators to move further on the exit side of the conveyor.
 
CHANGE PARTS
THE BASIC UNIT FITTED WITH PARTS, SUITABLE FOR ANY ONE SIZE OF BOTTLE AND POWDER FILL SIZE.

IN THE EVENT OF CHANGE OVER OF EACH BOTTLE SIZE AND FILL SIZE, FOLLOWING CHANGE PARTS WILL BE REQUIRED :

Powder Wheel - Two Powder Wheels with different port sizes are available to cover wide range of fill sizes from 5 grams to 25 grams. (Any one powder wheel will be fitted with the basic unit).
 
TECHNICAL SPECIFICATIONS
 
OPTIMUM OUTPUT: 40/60 Bottles / minute (Depending on the fill size & powder characteristics)
FILL SIZE :  5 grams to 25 grams (with two different powder wheels depending on neck diameter & powder characteristics)
ACCURACY : +-2% to 3% (For uniform density free flowing granulated powders at controlled humidity level below 30%) 
SPECIFICATION OF INPUT
BOTTLE : 
- NECK INSIDE DIAMETER :
- HEIGHT :

17.5 mm & above
85mm to 110mm
POWER SUPPLY / CHARACTERISTICS : 0.5 HP, 415 volts, 3 Phase (4 wire system), 50 cycles /sec. 
DIMENSIONS : 1315mm (L) x 720mm (W) x 1665mm (H)
NET WEIGHT : 360 kgs.
CASE DIMENSIONS : 1460mm (L) x 1000mm (W) x 1750mm (H)
GROSS WEIGHT : 550 kgs.

Back